Car engine repair Land Rover Freelander 2
Engine inspection and check
CAUTION: Diagnosis by substituting a component from another vehicle is NOT allowed. Substitution of control modules does not guarantee confirmation of the fault and, in addition, may cause additional...
CAUTION: Diagnosis by substituting a component from another vehicle is NOT allowed. Substitution of control modules does not guarantee confirmation of the fault and, in addition, may cause additional...
Tables of fault signs
Leaks Symptom Possible reason Action External coolant leaks Hose damage (ov) Expansion tank damage Damaged radiator Leakage through seals/gaskets Cracks/damages in castings About leaks in the cooling...
Leaks Symptom Possible reason Action External coolant leaks Hose damage (ov) Expansion tank damage Damaged radiator Leakage through seals/gaskets Cracks/damages in castings About leaks in the cooling...
Pinpoint tests
NOTE: When reference is made to "suitable equipment", this applies to the standard equipment of the service station. Refer to the operating instructions for your own equipment when performing any...
NOTE: When reference is made to "suitable equipment", this applies to the standard equipment of the service station. Refer to the operating instructions for your own equipment when performing any...
Draining and refilling engine oil
NOTE: The description of the removal procedure may contain a description of the installation steps. 1. Raise the vehicle. WARNING: Do not work on or under a vehicle that is only supported by a jack....
NOTE: The description of the removal procedure may contain a description of the installation steps. 1. Raise the vehicle. WARNING: Do not work on or under a vehicle that is only supported by a jack....
Gas distribution
Special tool 303-1270 Timing Pin, Crankshaft 303-1277 Timing Pin, Camshaft 1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure: Specifications (414-00 Charging...
Special tool 303-1270 Timing Pin, Crankshaft 303-1277 Timing Pin, Camshaft 1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure: Specifications (414-00 Charging...
Balance shaft end play
Special tool 303-1270 Timing Pin, Crankshaft 303-1328 Timing Plate, Balance Shafts 303-1329 Locking Tool, Balance Shafts 303-1330 Backlash Lever, Balance Shafts 1. NOTE: The clearance can only be...
Special tool 303-1270 Timing Pin, Crankshaft 303-1328 Timing Plate, Balance Shafts 303-1329 Locking Tool, Balance Shafts 303-1330 Backlash Lever, Balance Shafts 1. NOTE: The clearance can only be...
Intake manifold
Removing 1. Disconnect the battery ground wire. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the vehicle. WARNING: Place secure stands...
There is 1 a comment
Removing 1. Disconnect the battery ground wire. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the vehicle. WARNING: Place secure stands...
There is 1 a comment
Crankshaft pulley
Special tool 303-1270 Timing Pin, Crankshaft 303-1272 Locking Tool, Flywheel 303-1277 Timing Pin, Camshaft NOTE: The description of the removal procedure may contain a description of the installation...
Special tool 303-1270 Timing Pin, Crankshaft 303-1272 Locking Tool, Flywheel 303-1277 Timing Pin, Camshaft NOTE: The description of the removal procedure may contain a description of the installation...
Front crankshaft seal
Special tool 303-1274 Installer, Crankshaft Front Seal 303-1300 Remover, Crankshaft Seal Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the cover and...
Special tool 303-1274 Installer, Crankshaft Front Seal 303-1300 Remover, Crankshaft Seal Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the cover and...
Rear crankshaft seal
Special tool 100-012 Slide Hammer 303-1271 Installer, Seal 303-538 Remover/Installer, Crankshaft Oil Seal 308-615 Remover, Seals Removing 1. Disconnect the battery ground wire. Refer to procedure:...
Special tool 100-012 Slide Hammer 303-1271 Installer, Seal 303-538 Remover/Installer, Crankshaft Oil Seal 308-615 Remover, Seals Removing 1. Disconnect the battery ground wire. Refer to procedure:...
Cover of the gas distribution mechanism drive
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure:...
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure:...
Cylinder head cover
Special tool 303-1270 Timing Pin, Crankshaft 303-1277 Timing Pin, Camshaft NOTE: The valve cover and cylinder head are machined as an assembly and cannot be serviced separately. Removing 1. Remove...
Special tool 303-1270 Timing Pin, Crankshaft 303-1277 Timing Pin, Camshaft NOTE: The valve cover and cylinder head are machined as an assembly and cannot be serviced separately. Removing 1. Remove...
Camshafts
Removing 1. Remove the cover and disconnect the wire "masses" from the battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car....
Removing 1. Remove the cover and disconnect the wire "masses" from the battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car....
Camshaft seal
Special tool 205-053 Retainer, Drive Flange 205-053-04 Adapter, Drive Flange 303-1276 Installer, Camshaft Seal 303-935 Remover, Camshaft Seal Removing 1. Raise the vehicle. WARNING: Place secure...
Special tool 205-053 Retainer, Drive Flange 205-053-04 Adapter, Drive Flange 303-1276 Installer, Camshaft Seal 303-935 Remover, Camshaft Seal Removing 1. Raise the vehicle. WARNING: Place secure...
Timing belt
Special tool 303-1270 Timing Pin, Crankshaft 303-1272 Locking Tool, Flywheel 303-1277 Timing Pin, Camshaft NOTE: Timing and locking tools are installed to facilitate removal of the timing cover. All...
Special tool 303-1270 Timing Pin, Crankshaft 303-1272 Locking Tool, Flywheel 303-1277 Timing Pin, Camshaft NOTE: Timing and locking tools are installed to facilitate removal of the timing cover. All...
An exhaust manifold
WARNING: Use caution when working near hot exhaust system components. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the EGR heat exchanger (EGR). Refer to...
WARNING: Use caution when working near hot exhaust system components. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the EGR heat exchanger (EGR). Refer to...
Cylinder head
NOTE: The valve cover and cylinder head are machined as an assembly and cannot be serviced separately. Removing 1. Remove the cover and disconnect the ground wire from the battery. Refer to...
There is 1 a comment
NOTE: The valve cover and cylinder head are machined as an assembly and cannot be serviced separately. Removing 1. Remove the cover and disconnect the ground wire from the battery. Refer to...
There is 1 a comment
Oil sump
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Drain the engine...
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Drain the engine...
Oil pump
Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the oil pan. Refer to Procedure: Oil Sump (303-01B Engine - 2.2L Duratorq - Td4, Removal and installation). 3....
Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the oil pan. Refer to Procedure: Oil Sump (303-01B Engine - 2.2L Duratorq - Td4, Removal and installation). 3....
Oil cooler
Removing 1. Disconnect the wire "masses" battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car. WARNING: Place secure stands...
Removing 1. Disconnect the wire "masses" battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car. WARNING: Place secure stands...
Oil filter element
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle. WARNING: It is forbidden to carry out work on a vehicle...
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle. WARNING: It is forbidden to carry out work on a vehicle...
Left engine mount
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the...
NOTE: The description of the removal procedure in this manual may include installation steps. Removing 1. Raise and support the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the...
Right engine mount
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the motor...
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the motor...
Upper engine mount insulator
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Tightening torque: 10 Nm 2. Tightening torque: 110 Nm Installation 1. Installation is...
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Tightening torque: 10 Nm 2. Tightening torque: 110 Nm Installation 1. Installation is...
Engine bottom insulator
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the motor...
NOTE: The description of the removal procedure may contain a description of the installation steps. Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the motor...
Elongated part of the oil pan
Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the engine cover. Refer to Procedure: Engine Cover - 2.2L Duratorq - Td4 (501-05 Interior trim, Removal and...
There is 1 a comment
Removing 1. Raise the vehicle. WARNING: Place secure stands under the vehicle. 2. Remove the engine cover. Refer to Procedure: Engine Cover - 2.2L Duratorq - Td4 (501-05 Interior trim, Removal and...
There is 1 a comment
Flywheel
Removing 1. Disconnect the wire "masses" battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car. WARNING: Place secure stands...
Removing 1. Disconnect the wire "masses" battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications). 2. Raise the car. WARNING: Place secure stands...
Floppy disk
Special tool 303-1272 Locking Tool, Flywheel NOTE: The illustration shows a flywheel, the tightening sequence and bolt locations for the faceplate are the same. Removing 1. Remove the cover and...
Special tool 303-1272 Locking Tool, Flywheel NOTE: The illustration shows a flywheel, the tightening sequence and bolt locations for the faceplate are the same. Removing 1. Remove the cover and...
Balance shaft assembly
Special tool 303-1270 Timing Pin, Crankshaft 303-1328 Timing Plate, Balance Shafts 303-1329 Locking Tool, Balance Shafts NOTE: This procedure contains removal and installation details only, if a...
Special tool 303-1270 Timing Pin, Crankshaft 303-1328 Timing Plate, Balance Shafts 303-1329 Locking Tool, Balance Shafts NOTE: This procedure contains removal and installation details only, if a...
Removing the engine
Special tool 205-857 Remover, Halfshaft General Equipment: Powertrain Jack NOTE: In this procedure, the engine is removed with the transmission. 1. Raise the vehicle. WARNING: Place secure stands...
Special tool 205-857 Remover, Halfshaft General Equipment: Powertrain Jack NOTE: In this procedure, the engine is removed with the transmission. 1. Raise the vehicle. WARNING: Place secure stands...
Engine installation
General Equipment: Powertrain Jack Installation 1. With the help of a second mechanic, carefully install the engine and gearbox. General Equipment: Powertrain Jack 2. Right side: Install the engine...
General Equipment: Powertrain Jack Installation 1. With the help of a second mechanic, carefully install the engine and gearbox. General Equipment: Powertrain Jack 2. Right side: Install the engine...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Power unit: Petrol engine 4.0L Land Rover Discovery 3 (2004-2009)
• Power unit: Diesel engine TD6 Land Rover Range Rover 3 (2001-2012)
• Power unit: Diesel engine ID4 2.4L Land Rover Defender 2007+ (2007-2016)
• Power unit: Petrol engine 4.0L Land Rover Discovery 3 (2004-2009)
• Power unit: Diesel engine TD6 Land Rover Range Rover 3 (2001-2012)
• Power unit: Diesel engine ID4 2.4L Land Rover Defender 2007+ (2007-2016)