Vehicle lighting and headlights Land Rover Freelander 1
Headlamps — pair — light adjustment — up to 04MY
Examination 1. Align the test equipment with the headlight. 2. Turn on the headlights. Headlight adjustment: For all countries except USA and Canada: Headlights must be adjusted so that the light...
Examination 1. Align the test equipment with the headlight. 2. Turn on the headlights. Headlight adjustment: For all countries except USA and Canada: Headlights must be adjusted so that the light...
Headlamps — pair — light adjustment — from 04MY
Examination 1. Align the test equipment with the headlight. 2. Turn on the headlights. Headlight adjustment: For all countries except USA and Canada: Headlights must be adjusted so that the light...
Examination 1. Align the test equipment with the headlight. 2. Turn on the headlights. Headlight adjustment: For all countries except USA and Canada: Headlights must be adjusted so that the light...
Headlight assembly — models up to 04MY
Dismantling 1. Remove the front bumper. EXTERIOR PARTS, REPAIR WORK, Front bumper assembly - for cars up to model year 2004. 2. Unscrew the bolt and screw securing the headlight to the body. 3....
Dismantling 1. Remove the front bumper. EXTERIOR PARTS, REPAIR WORK, Front bumper assembly - for cars up to model year 2004. 2. Unscrew the bolt and screw securing the headlight to the body. 3....
Headlight assembly — models from 04MY
Dismantling 1. Remove the front bumper. EXTERIOR PARTS, REPAIR WORK, Front Bumper Assembly - for vehicles of model year 2004 and later. 2. Unscrew the 2 headlight bracket mounting bolts and remove...
Dismantling 1. Remove the front bumper. EXTERIOR PARTS, REPAIR WORK, Front Bumper Assembly - for vehicles of model year 2004 and later. 2. Unscrew the 2 headlight bracket mounting bolts and remove...
Turn signal repeater lamp
Dismantling 1. Push the light towards the rear of the car to release the retainer, remove the light from the wing. 2. Disconnect the connector with the electrical cable. Installation 1. Connect the...
Dismantling 1. Push the light towards the rear of the car to release the retainer, remove the light from the wing. 2. Disconnect the connector with the electrical cable. Installation 1. Connect the...
Rear combination light
Dismantling 1. Unscrew the 2 Torx screws securing the light to the bumper. The illustration corresponds to the model up to 04MY. 2. Release the light, disconnect the connector and remove the light....
Dismantling 1. Unscrew the 2 Torx screws securing the light to the bumper. The illustration corresponds to the model up to 04MY. 2. Release the light, disconnect the connector and remove the light....
Lantern — license plate lighting
Dismantling 1. Remove the 2 screws securing the light to the cargo door handle. 2. Disconnect the 2 connectors from the license plate light. Installation 1. Install the license plate light and...
Dismantling 1. Remove the 2 screws securing the light to the cargo door handle. 2. Disconnect the 2 connectors from the license plate light. Installation 1. Install the license plate light and...
Combination light — fog light/side lights — models from 04MY
Dismantling 1. Release and remove the combination light cover from the bumper. 2. Unscrew the 3 screws securing the combination light to the bumper. 3. Release the combination lamp, disconnect the...
Dismantling 1. Release and remove the combination light cover from the bumper. 2. Unscrew the 3 screws securing the combination light to the bumper. 3. Release the combination lamp, disconnect the...
Combination light — rear
Dismantling 1. Remove the 3 Torx screws securing the light to the body. 2. Release the flashlight, disconnect the 2 bulb holders and remove the flashlight. 3. Remove the rubber seal of the lamp....
Dismantling 1. Remove the 3 Torx screws securing the light to the body. 2. Release the flashlight, disconnect the 2 bulb holders and remove the flashlight. 3. Remove the rubber seal of the lamp....
Lamp — Center High Mounted Stop Light (CHMSL)
Dismantling 1. Remove the 3 screws securing the CHMSL bracket to the spare wheel support. 2. Loosen the light and disconnect the connector. 3. Remove the light and bracket. 4. Unscrew the 2 nuts and...
Dismantling 1. Remove the 3 screws securing the CHMSL bracket to the spare wheel support. 2. Loosen the light and disconnect the connector. 3. Remove the light and bracket. 4. Unscrew the 2 nuts and...
Lantern — glove box
Dismantling 1. Open the glove compartment. 2. Remove the light from the glove compartment. 3. Disconnect the 2 connectors and remove the glove box light. Installation 1. Position the light and attach...
Dismantling 1. Open the glove compartment. 2. Remove the light from the glove compartment. 3. Disconnect the 2 connectors and remove the glove box light. Installation 1. Position the light and attach...
Lantern — cargo compartment
Dismantling 1. Remove the cargo area light from the trim panel. 2. Disconnect the 2 connectors and remove the cargo area light. Installation 1. Position the light and attach the pads. 2. Install the...
Dismantling 1. Remove the cargo area light from the trim panel. 2. Disconnect the 2 connectors and remove the cargo area light. Installation 1. Position the light and attach the pads. 2. Install the...
Switch — headlight adjustment
Dismantling 1. Remove the headlight adjustment switch from the instrument panel and disconnect the connector block. Installation 1. Position the switch, connect the connector block and secure the...
Dismantling 1. Remove the headlight adjustment switch from the instrument panel and disconnect the connector block. Installation 1. Position the switch, connect the connector block and secure the...
Switch — Glove Box
Dismantling 1. Remove the glove box. INTERIOR TRIM DETAILS, REPAIR WORK, Glove box. 2. Disconnect the 2 connectors from the switch in the glove box. 3. Release the clips and remove the switch from...
Dismantling 1. Remove the glove box. INTERIOR TRIM DETAILS, REPAIR WORK, Glove box. 2. Disconnect the 2 connectors from the switch in the glove box. 3. Release the clips and remove the switch from...
Switch — hazard warning light
Dismantling 1. Remove the radio. ENTERTAINMENT SYSTEMS, REPAIR WORK, Radio receiver - models up to 04MY. 2. Remove the ventilation and heating system control handles. 3. Unscrew the 2 screws securing...
Dismantling 1. Remove the radio. ENTERTAINMENT SYSTEMS, REPAIR WORK, Radio receiver - models up to 04MY. 2. Remove the ventilation and heating system control handles. 3. Unscrew the 2 screws securing...
Switch — combined, direction indicators / headlights / horn
Dismantling 1. Remove the upper and lower steering column covers. STEERING, Steering gear, Steering column cover. 2. Disconnect the 2 connector blocks from the turn signal and light switch. 3. Turn...
Dismantling 1. Remove the upper and lower steering column covers. STEERING, Steering gear, Steering column cover. 2. Disconnect the 2 connector blocks from the turn signal and light switch. 3. Turn...
Switch — rear fog lights
Dismantling 1. Remove the instrument panel cover. INSTRUMENTS, REPAIR WORK, Instrument panel cover - models up to 04MY. 2. Remove the rear fog light switch from the instrument panel cover....
Dismantling 1. Remove the instrument panel cover. INSTRUMENTS, REPAIR WORK, Instrument panel cover - models up to 04MY. 2. Remove the rear fog light switch from the instrument panel cover....
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Electrical equipment: Lighting and headlights Land Rover Discovery 3 (2004-2009)
• Electrical equipment: Lighting and headlights Land Rover Range Rover 3 (2001-2012)
• Electrical equipment: Lighting and headlights Land Rover Defender 2007+ (2007-2016)
• Electrical equipment: Lighting and headlights Land Rover Discovery 3 (2004-2009)
• Electrical equipment: Lighting and headlights Land Rover Range Rover 3 (2001-2012)
• Electrical equipment: Lighting and headlights Land Rover Defender 2007+ (2007-2016)