Rear combination light (Freelander 1)

Dismantling

1. Unscrew the 2 Torx screws securing the light to the bumper. The illustration corresponds to the model up to 04MY.

2. Release the light, disconnect the connector and remove the light.

NOTE: If disassembly was performed only to provide access to other system components, no further disassembly operations should be performed.

3. Release the socket and remove the lamp holder from the flashlight housing.

Installation

1. Install the socket and lamp holder into the flashlight housing.

2. Install the combination light, attach the socket and secure it to the bumper using Torx screws.