Car brake system Land Rover Freelander 2
Brake System Specifications
Brake fluid Detail Specifications Recommended hydraulic fluid* SHELL DONAX YB DOT4 ESL CAUTION: * If the specified fluid is not available, use a low viscosity DOT 4 brake fluid that meets ISO 4925...
Brake fluid Detail Specifications Recommended hydraulic fluid* SHELL DONAX YB DOT4 ESL CAUTION: * If the specified fluid is not available, use a low viscosity DOT 4 brake fluid that meets ISO 4925...
Description and principle of operation of the brake system
Location of elements Pos. spare part no Name 1 - Brake pedal, brake booster and master cylinder assembly 2 - Parking brake lever 3 - Rear brake disc assembly with parking brake 4 - Anti-Lock Braking...
Location of elements Pos. spare part no Name 1 - Brake pedal, brake booster and master cylinder assembly 2 - Parking brake lever 3 - Rear brake disc assembly with parking brake 4 - Anti-Lock Braking...
Diagnostics and checks of the brake system
Operating principle For a detailed description of the brake system, please refer to the relevant section «Description and operation» in the workshop manual. For more information, please refer to:...
Operating principle For a detailed description of the brake system, please refer to the relevant section «Description and operation» in the workshop manual. For more information, please refer to:...
Road test of the brake system
Perform a road test to compare the actual performance of the brake system with the desired performance expected by the driver. The ability of the test driver to correctly compare and identify faults...
Perform a road test to compare the actual performance of the brake system with the desired performance expected by the driver. The ability of the test driver to correctly compare and identify faults...
Pinpoint tests of the brake system
Pinpoint test A: noise in the brakes A1: brake pad inspection Inspect the condition of the front and rear brake pads. Check the shims for damage. Are the brake pads ok? Yes - GO to A2. No - If...
Pinpoint test A: noise in the brakes A1: brake pad inspection Inspect the condition of the front and rear brake pads. Check the shims for damage. Are the brake pads ok? Yes - GO to A2. No - If...
Item checks
Vacuum brake booster Check all hoses and connections. All unused connectors of the vacuum system must be closed with plugs. Hoses and their connections must be properly secured, in good condition,...
Vacuum brake booster Check all hoses and connections. All unused connectors of the vacuum system must be closed with plugs. Hoses and their connections must be properly secured, in good condition,...
Removal of air from the brake system
WARNING: If any items above the hydraulic control box are being replaced (HCU), including the HCU itself, bleed the brake system using the diagnostic system prescribed by Land Rover. This will ensure...
WARNING: If any items above the hydraulic control box are being replaced (HCU), including the HCU itself, bleed the brake system using the diagnostic system prescribed by Land Rover. This will ensure...
Front Disc Brake Specification
General specification Detail Specifications Front disc brakes ventilated Front wheel diameter: Petrol 3.2 l 316 mm (12,4 in) Diesel 2.2 l 300 mm (11,8 in) Thickness of new front discs (all engines)...
General specification Detail Specifications Front disc brakes ventilated Front wheel diameter: Petrol 3.2 l 316 mm (12,4 in) Diesel 2.2 l 300 mm (11,8 in) Thickness of new front discs (all engines)...
Description of front disc brake
Location of elements NOTE: Front disc brake shown for I6 gasoline engine; the front disc brake of the TD4 diesel engine is similar. Pos. spare part no Name 1 - Anti-lock brake sensor wire (ABS) 2 -...
Location of elements NOTE: Front disc brake shown for I6 gasoline engine; the front disc brake of the TD4 diesel engine is similar. Pos. spare part no Name 1 - Anti-lock brake sensor wire (ABS) 2 -...
The principle of operation of the front disc brake
Brake activation When the brake pedal is depressed, primary hydraulic pressure is generated in the floating caliper chamber, causing the piston to move in the direction of the brake disc. The moving...
Brake activation When the brake pedal is depressed, primary hydraulic pressure is generated in the floating caliper chamber, causing the piston to move in the direction of the brake disc. The moving...
Front brake pads
Removing 1. Raise and support the vehicle. Remove the front wheels. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). 2. Remove the brake pad spring clip. 3....
Removing 1. Raise and support the vehicle. Remove the front wheels. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). 2. Remove the brake pad spring clip. 3....
Front brake disc
Removing 1, Raise and support the car. Remove the front wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Do not work on or under a vehicle...
Removing 1, Raise and support the car. Remove the front wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Do not work on or under a vehicle...
Front brake caliper base plate
Removing 1. Raise and support the vehicle. WARNING: Do not work on or under a vehicle supported only by a jack. Be sure to install reliable supports under the car. 2. Remove the front wheel. Refer to...
Removing 1. Raise and support the vehicle. WARNING: Do not work on or under a vehicle supported only by a jack. Be sure to install reliable supports under the car. 2. Remove the front wheel. Refer to...
Rear Disc Brake Specification
General specification Pos. Characteristics Rear disc brakes: 3.2L petrol engine ventilated Diesel engine 2.2L Solid Rear Disc Diameter: ventilated 302 mm (11,9 in) Solid 302 mm (11,9 in) New rear...
General specification Pos. Characteristics Rear disc brakes: 3.2L petrol engine ventilated Diesel engine 2.2L Solid Rear Disc Diameter: ventilated 302 mm (11,9 in) Solid 302 mm (11,9 in) New rear...
Description of rear disc brake
Location of elements Pos. spare part no Name 1 - Anti-lock brake sensor wire (ABS) 2 - flexible hose 3 - dust shield 4 - Parking brake assembly 5 - Dust shield fixing screw (4 things.) 6 - Brake disc...
Location of elements Pos. spare part no Name 1 - Anti-lock brake sensor wire (ABS) 2 - flexible hose 3 - dust shield 4 - Parking brake assembly 5 - Dust shield fixing screw (4 things.) 6 - Brake disc...
The principle of operation of the rear disc brake
Brake activation When the brake pedal is depressed, primary hydraulic pressure is generated in the floating caliper chamber, causing the piston to move in the direction of the brake disc. The moving...
Brake activation When the brake pedal is depressed, primary hydraulic pressure is generated in the floating caliper chamber, causing the piston to move in the direction of the brake disc. The moving...
Rear brake pads
Removing 1. Raise and support the vehicle. Remove the wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: It is forbidden to carry out work on a...
There is 1 a comment
Removing 1. Raise and support the vehicle. Remove the wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: It is forbidden to carry out work on a...
There is 1 a comment
Rear brake disc
NOTE: If the parking brake pads or brake discs have been removed to gain access to other components, DO NOT PERFORM the break-in procedure. Removing 1. Raise and support the vehicle. Remove wheels....
NOTE: If the parking brake pads or brake discs have been removed to gain access to other components, DO NOT PERFORM the break-in procedure. Removing 1. Raise and support the vehicle. Remove wheels....
Rear brake caliper
Removing 1. Raise the vehicle. Remove the wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Place secure stands under the vehicle. 2. CAUTION:...
Removing 1. Raise the vehicle. Remove the wheel. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Place secure stands under the vehicle. 2. CAUTION:...
Rear brake caliper base plate
Removing 1. Raise and support the vehicle. Remove the wheel and tire assembly. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Place secure stands...
Removing 1. Raise and support the vehicle. Remove the wheel and tire assembly. Refer to procedure: Wheel and tire (204-04 Wheels and tires, Removal and installation). WARNING: Place secure stands...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Chassis: Brake system Land Rover Discovery 3 (2004-2009)
• Chassis: Brake system Land Rover Defender 2007+ (2007-2016)
• Chassis: Brake system Land Rover Discovery 3 (2004-2009)
• Chassis: Brake system Land Rover Defender 2007+ (2007-2016)