Front Brake Caliper Support Plate (Freelander 2)

Removal

1. Raise and support the vehicle.

WARNING: Do not work on or under a vehicle supported solely by a jack. Be sure to support the vehicle securely.

2. Remove the front wheel. Refer to the procedure: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).



3. Tightening torque: 28 Nm



4. Release the brake caliper.

CAUTION: Do not allow the brake caliper to hang by the brake hose.

5. Tightening torque: 200 Nm

CAUTION: Use new bolts.

The publication was copied from a web resource LRman.ru

Installation

1. Install the elements back in place in reverse order.

CAUTION: Make sure the brake hose is not kinked and is installed correctly.