Engine management system EDC Land Rover Freelander 1
Engine Control Module (ECM)
Dismantling 1. Disconnect the negative battery terminal. 2. Unscrew the 5 screws securing the cover of the mounting box ("E" box). Remove the cover. 3. Disconnect 5 connectors from the control unit....
Dismantling 1. Disconnect the negative battery terminal. 2. Unscrew the 5 screws securing the cover of the mounting box ("E" box). Remove the cover. 3. Disconnect 5 connectors from the control unit....
Sensors: Coolant Temperature (ECT) Sensor
Dismantling 1. Disconnect the negative battery terminal. 2. Drain the coolant from the engine. COOLING SYSTEM: Td4 engine, ADJUSTMENTS, Draining coolant, flushing the system and filling. 3. Remove...
Dismantling 1. Disconnect the negative battery terminal. 2. Drain the coolant from the engine. COOLING SYSTEM: Td4 engine, ADJUSTMENTS, Draining coolant, flushing the system and filling. 3. Remove...
Sensors: Crankshaft Position Sensor (CKP)
Dismantling 1. Disconnect the negative battery terminal. 2. Remove the starter. ENGINE STARTING AND BATTERY CHARGING SYSTEM, REPAIR WORK, Starter - Td4 engine. 3. Disconnect the connector from the...
Dismantling 1. Disconnect the negative battery terminal. 2. Remove the starter. ENGINE STARTING AND BATTERY CHARGING SYSTEM, REPAIR WORK, Starter - Td4 engine. 3. Disconnect the connector from the...
Sensors: Camshaft Position (CMP) Sensor
Dismantling 1. Disconnect the negative battery terminal. 2. Remove the engine soundproofing cover. ENGINE - Td4, Inlet and outlet camshafts, Engine soundproofing casing, models produced before May...
Dismantling 1. Disconnect the negative battery terminal. 2. Remove the engine soundproofing cover. ENGINE - Td4, Inlet and outlet camshafts, Engine soundproofing casing, models produced before May...
Mass Air Flow (MAF) and Temperature (IAT) Sensor
Sensors: Combined mass air flow (MAF) and intake air temperature (IAT) sensor. Dismantling 1. Disconnect the negative battery terminal. 2. Remove the air cleaner filter element. DIESEL ENGINE FUEL...
Sensors: Combined mass air flow (MAF) and intake air temperature (IAT) sensor. Dismantling 1. Disconnect the negative battery terminal. 2. Remove the air cleaner filter element. DIESEL ENGINE FUEL...
Throttle Position Sensor: Before May 2003
Dismantling 1. Disconnect the negative battery terminal. 2. Unscrew the 2 nuts and remove the gas pedal from the studs. 3. Release the gas pedal position sensor connector from the bracket and...
Dismantling 1. Disconnect the negative battery terminal. 2. Unscrew the 2 nuts and remove the gas pedal from the studs. 3. Release the gas pedal position sensor connector from the bracket and...
Throttle Position Sensor: After May 2003
Dismantling 1. Check that the ignition is off. 2. Unscrew 2 nuts and release the gas pedal with the throttle position sensor from the studs. 3. Disconnect the connector from the throttle position...
Dismantling 1. Check that the ignition is off. 2. Unscrew 2 nuts and release the gas pedal with the throttle position sensor from the studs. 3. Disconnect the connector from the throttle position...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian