Inspection and verification (Freelander 2)

CAUTION: Diagnostics by substituting a component from another vehicle is NOT permitted. Substituting control modules does not guarantee confirmation of the fault and, in addition, may cause additional faults in the vehicle being tested and/or in the vehicle from which the modules are removed.

1. Visually inspect for obvious signs of mechanical and electrical faults and system integrity.

Mechanical factors	Electrical factors
Condition, correct installation and reliability of fastening of seat elements and fasteners	Fuses and fuses Wiring harnesses - damage/corrosion Electrical connectors Damaged/corroded pins

2. If an obvious cause for the problem you identified or the customer described is found, correct it (if possible) before moving on to further action.

3. If the cause is not visually obvious, check the symptom of the malfunction and contact table of signs of malfunction or check for DTCs and refer to the Index diagnostic trouble codes (DTC).

The material was taken from the specified website (www.LRman.ru)