Rear wheel antenna tire air monitoring system (Range Rover 3)

Removal

1. Raise the vehicle using a jack and place it on stands.

WARNING: It is strictly forbidden to work inside or under a vehicle supported only by a lift (jack). In all cases, the vehicle must be supported on safety stands.

2. Unscrew 5 wheel nuts and remove the wheel.

(The material was taken from the specified website: «www.lrman.ru»)

3. Unscrew the 2 antenna mounting bolts, disconnect the connector and remove the antenna.

Installation

1. Install and tighten the antenna mounting bolts.

2. Connect the connector to the antenna.

3. Replace the wheel and tighten the nuts to a torque of 140 Nm.

4. Remove the stands and lower the vehicle.