Front outer parking assistance sensor (Range Rover 3)

Removal

1. Loosen the screw securing the lower part of the bumper to the wheel arch liner.

2. Slightly move the lower edge of the fender liner to the side and release the ultrasonic sensor from the inside of the bumper.



3. Disconnect the connector with the electrical cable.

4. Loosen the latches and remove the cover from the sensor.

Installation

1. Install the sensor in the trim, connect the wiring harness connector.

2. Install the sensor in the bumper.

3. Install the wheel arch liner in place and tighten the screws that secure it.