Front interior parking assistance sensor (Freelander 2)

Removal

1. Raise and support the vehicle.

WARNING: Do not work on or under a vehicle supported solely by a jack. Always support the vehicle securely.

2. Remove the front wheels. Refer to the procedure: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. Remove the front bumper cover. Refer to procedure: Front Bumper Cover (501-19 Bumpers, Removal and Installation).

3. Remove the front bumper cover. Refer to procedure: Front Bumper Cover (501-19 Bumpers, Removal…

The text of the article was taken from the website (LRMAN.ru)

Installation

1. When installing, repeat the removal procedure in reverse order.

CAUTION: If a new sensor is installed, only the front surface needs to be painted. Failure to follow these instructions may result in component failure.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Roman Mitrofanov

Parking Assistance Specification
Description and principle of operation
Parking assistance system module
Parking assistance system sensors
Parking assistance switch
Parking assistant control diagram
How the parking assistant works
Inspection and verification

Current article

Front interior parking assistance sensor

Front exterior parking assistance sensor
Removal and installation the system module
Rear interior parking assistance sensor
Rear exterior parking assistance sensor

Comments on this article

No comments yet

Freelander 2

Freelander 1