Rear axle
| Type | Bevel gears with spiral teeth, fully floating shafts |
| Gear ratio | 3,54:1 |
Sealants
| Position | Land Rover Part Number |
| Rear axle differential box | STC 3811 |
| Bolts securing the crown gear to the differential box | STC 50552 |
| Differential box bolts | STC 50552 |
| Outer hub bolts | STC 50552 |
Lubricants
| Position | Specification |
| Main gear* | Molytex EP90 |
* Do not use any oil other than the one prescribed.
Filling volumes
| Unit | Filling volume |
| Differential - Models 90 | 1.70 l |
| Differential - Models 110 | 2.26 l |
Tightening torque specifications
| Description | Nm | lb-ft |
| Pinion housing to axle housing | 41 | 30 |
| Crown gear to differential box | 58* | 43* |
| Differential bearing cover to pinion housing | 90 | 65 |
| Differential drive flange to propeller shaft | 47 | 34 |
| Bevel pinion nut | 129 | 96 |
| Lower arm to bridge | 176 | 130 |
| Ball joint of the swivel bracket to the bridge | 176 | 130 |
| Brake disc to hub | 73* | 53* |
*Apply thread sealant, part number STC 50550, to threads.
(The full version is available on the website: «LRman.ru»)
Comments on this article