1. Open each door in turn and lubricate the hinges and door stops with the recommended grease.
2. Lubricate the door lock, striker and cylinder lock (Full construction) PTFE lubricant. Remove excess grease, especially from the area of the striker of the door lock, to avoid customer complaints.
3. Check up an inhaling of accessible elements of fastening of the lock of a door and a reciprocal part of the lock.
4. Open and close the door to check if it works smoothly. Make sure the door closes securely.
5. Check the smooth operation of the cylinder lock.
6. Open the hood, lubricate the hinges, striker, lock and latch with a suitable lubricant.
Door locks and hinges (Defender 2007+)
This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Previous articles
Current article
Door locks and hinges
Next articles
Similar articles from Land Rover repair manuals:
• Door Locks, Hinges, Check Stops and Hood Latches Freelander 1 (1997-2006)
• DTC Driver/Passenger Door Module (DDM/PDM) Freelander 2 (2006-2014)
• Front door speaker Discovery 3 (2004-2009)
• Front Door Airbag Module Range Rover 3 (2001-2012)
• Door Locks, Hinges, Check Stops and Hood Latches Freelander 1 (1997-2006)
• DTC Driver/Passenger Door Module (DDM/PDM) Freelander 2 (2006-2014)
• Front door speaker Discovery 3 (2004-2009)
• Front Door Airbag Module Range Rover 3 (2001-2012)
No comments yet
Comments on this article