Door locks, hinges, checking the limiters and hood latches (Freelander 1)

Examination

1. Check the operation of each door, door locks, hood latch and fuel filler door.

Lubrication of front and rear side doors

1. Open each door in turn and lubricate the door hinges and door stop with the recommended plastic lubricant.

FILLING CAPACITIES, LIQUIDS AND OILS, Lubrication system.

2. Lubricate the door lock, lock striker and door lock mechanism with PTFE type lubricant. Remove excess lubricant, especially from the door lock striker area, to avoid staining clothing.

3. Check the tightness of the door lock and latch.

4. Open and close the door to make sure the door lock operates easily and quietly. Make sure the door locks securely.

5. Check the smooth operation of the door lock button.

Lubrication of the rear door

1. Open the rear door, lubricate the door hinges with the recommended plastic lubricant.

FILLING CAPACITIES, LIQUIDS AND OILS, Lubrication system.

2. Lubricate the rear sliding door limiter.

3. Lubricate the rear door lock and lock striker with PTFE type grease. Remove excess grease, especially from the rear door lock striker area, to avoid customer complaints.

4. Check the tightness of the rear door lock and latch.

Lubrication of the bonnet

1. With the hood open, lubricate the hood hinges, hood latch, hood latch and hood safety mechanism with the appropriate lubricant.

FILLING CAPACITIES, LIQUIDS AND OILS, Lubrication system.

Hatch guides, sliders and seals

1. With the sunroof open, lubricate the sunroof guides, sliders and seals. Remove excess grease to avoid it soaking into the headliner and trim.

2. Make sure the hatch closes properly.

Drain pipes and hatch channels

1. Remove any dirt that has fallen onto the hatch tray.

The material was taken from a website [LRman.ru]

2. Blow out all accessible drain pipes and hatch channels with compressed air under low pressure to ensure that they are not clogged.