Airbag deployment
WARNING: Before carrying out work on passive safety systems, it is necessary to carefully read the relevant technical documentation.
1. Follow all safety rules when working with passive safety systems.
GENERAL INFORMATION, Safety precautions when working with the airbag system (SRS).
2. Remove the headliner.
CAR INTERIOR PARTS, REPAIR WORK, Ceiling.
3. Disconnect the connector from the airbag module.
4. Check the condition of the LRT-86-003 device and the cables supplied with it.
5. Connect the LRT-86-003/08 cable of the device to the airbag.
6. Attach the LRT-86-003 tool to the end of the LRT-86-003/08 cable.
7. Connect the LRT-86-003 device to the battery.
CAUTION: Make sure all people are at least 15 m away from the air bag module.
8. To activate the airbag, press the power button on the device body.
9. Disconnect the device from the battery.
WARNING: When triggered, parts of the airbag heat up to a high temperature and can cause burns. Wait 30 minutes after it is triggered before touching the airbag module.
10. Disconnect the device cable from the airbag.
CAUTION: Reuse of any components of the passive safety systems is prohibited.
NOTE: Do not transport parts of deployed passive restraint systems in the passenger compartment of the vehicle.
Comments on this article