Dynamic stability control system sensor (Range Rover 3)

Dismantling

1. Remove the center console cover.

CAR INTERIOR PARTS, REPAIR WORK, Trim - center console.

2. Loosen and remove the air box.



3. Remove the 2 screws securing the dynamic stabilization system sensor.

4. Release the sensor, disconnect the connector from the socket and remove the sensor.

Assembly

1. Install the dynamic stability control system sensor into place and connect the connector block.

2. Align the dynamic stability control sensor with the mounting bracket, tighten the screws and tighten them to 8 N·m.

3. Reinstall the air box.

4. Reinstall the center console cover.

CAR INTERIOR PARTS, REPAIR WORK, Trim - center console.

[The material was taken from a website: www.lrman.ru]

5. To ensure correct operation of the ABS, diagnostics MUST be performed using the Testbook/T4 diagnostic tool.