Vibration Damper TD6 (Range Rover 3)

Dismantling

1. Remove the front propeller shaft.

DRIVE SHAFTS, REPAIR WORK, Cardan shaft - front.

2. Remove the 3 Torx screws securing the vibration damper and remove the vibration damper.

Assembly

1. Clean the vibration damper and mating surfaces.

2. Install the vibration damper and tighten the Torx screws to 23 Nm.

3. Install the front propeller shaft in place.

DRIVE SHAFTS, REPAIR WORK, Cardan shaft - front.