Removing
1. Remove the door trim panel.
For more information, see chapter: Front door trim panel (501-05 Interior trim, Removal and installation).
2. Remove the plastic sheet in place to gain access to the door opening handle.
3. Release the spring clip and disconnect the drive rod from the latch mechanism.
4. Release the drive rod from the plastic clip in the base plate.
5. Turn out two screws of fastening of the handle of opening of a door to the basic panel and take the lever and driving draft.
Installation
1. Slide the drive rod into place and secure the arm loosely to the base plate with two screws.
2. Connect the drive rod to the latch mechanism and secure with the spring clip.
3. Tighten the control lever mounting screws.
4. Attach the drive rod to the plastic clip in the base plate.
5. Fix the plastic cover.
6. Install the door trim cover.
For more information, see chapter: Front door trim panel (501-05 Interior trim, Removal and installation).
Comments on this article