Front door release handle (Freelander 1)

Dismantling

1. Remove the plastic trim from the front door panel.

DOORS, Removing the front door assembly to provide access to other elements, installing the front door, Plastic trim for the front door of a 5-door car.

DOORS, Removing the front door assembly to provide access to other elements, installing the front…

2. Drill out the 2 rivets securing the inner door handle.

3. Remove the handle.

4. Disconnect the cable from the handle.

Installation

1. Connect the cable to the inside door handle.

The source of the article is located on the website: www.LRman.ru

2. Install the handle on the door and secure it with rivets.

3. Install the plastic door panel trim.

DOORS, Removing the front door assembly to provide access to other elements, installing the front door, Plastic trim for the front door of a 5-door car.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Konstantin Nazarov

Adjusting the front or rear door lock latch
Adjusting the front door hinges
Removal the front door assembly to provide access to other components
Removal the rear door assembly to provide access to other components
Removal the tailgate assembly to provide access to other components
Front door glass
Rear door glass
Rubber/Felt Front Door Window Seal

Current article

Front door release handle

Rear door release handle
5-door car door lock release handle cable
Side trim for rear window of 5-door car
Rear door outer handle
External handle of the luggage compartment door
Front door exterior handle
Inside door handle 5-door car — up to 2004

Comments on this article

No comments yet

Freelander 2

Freelander 1