Dismantling
1. Remove an external rear-view mirror.
EXTERIOR PARTS, REPAIR WORKS, Electrically adjustable exterior rear-view mirror.
2. Lower the door glass.
3. Remove the inner seal.
4. Carefully remove the window seal from the door, starting at the bottom front corner and working your way around the entire perimeter of the window opening.
Installation
1. Lubricate the corners of the seal with soapy water.
ATTENTION: The design of the seal includes an internal metal frame. Be careful not to bend it while installing the seal. Otherwise, the frame will be deformed.
2. Start installing the seal from the top rear corner of the window opening. Achieve a complete match between the profiles of the seal and the window opening.
3. Fix a seal in that part of a window aperture which adjoins A-pillar 'A' of a body.
4. Fix the seal at the base of the A-pillar 'A'.
5. Carefully remove the seal from the door in the area of the middle pillar 'B' of the body to release its lower corner. In this case, the sealant will be located above the side of the window opening. Make sure the seal is not twisted. Starting at the top corner, install the seal on the door.
NOTE: The radius of the bottom corner of the seal must match the profile of the window opening.
6. Fix the seal in the lower part of the window opening by unfolding it on the edge of the door and pressing evenly along the entire length of the lower part of the window opening.
7. Install the inner seal.
8. Raise and lower the glass to check that the seal is installed correctly.
9. Establish an external rear-view mirror.
EXTERIOR PARTS, REPAIR WORKS, Electrically adjustable exterior rear-view mirror.
Comments on this article