Dismantling
1. Turn away the screw of fastening of an overlay of the handle to a door and remove an overlay.
2. Turn away 2 screws of fastening of a door handle.
3. Carefully release the 10 fasteners securing the trim panel to the door.
4. Disconnect an electric socket and remove the decorative panel.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
5. Remove the 2 Torx screws securing the power window control panel to the trim panel and remove the power window control panel.
6. Remove the 4 Torx screws securing the door handle to the trim panel and remove the handle.
7. Remove the 4 Torx screws securing the speaker grille to the trim panel and remove the speaker grille.
8. Release the latch and remove the lock button guide.
9. Remove 10 fasteners from the decorative panel.
Installation
1. Install the fasteners on the decorative panel.
2. Install the lock button guide on the decorative panel and secure it with the retainer.
3. Install the speaker grille into the decorative panel and secure it with Torx screws.
4. Place the door handle on the trim panel and secure with Torx screws.
5. Install the power window control panel into the trim panel and secure with Torx screws.
6. Bring the decorative panel to a door and connect an electric socket of the control panel of a window regulator.
7. Install the decorative panel on the door and fasten the clips.
8. Wrap screws of fastening of a door handle.
9. Install the handle cover and secure it with the screw.
Comments on this article