Dismantling
1. Release the front glass guide from the attachment to the front door.
2. Disconnect the electrical connectors from the tweeter type "Lucar".
3. Remove the front glass guide.
4. Turn away the screw of fastening of an overlay of the handle to a door and remove an overlay.
5. Turn away 2 screws of fastening of a door handle.
6. Remove the 5 screws securing the door pocket.
7. Release 7 clips and remove the decorative panel.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
8. Remove 7 fasteners from the decorative panel.
9. Remove the 4 Torx screws securing the door pocket to the trim panel and remove the pocket.
10. Remove the 4 Torx screws securing the door handle to the trim panel and remove the handle.
11. Remove the 4 Torx screws securing the speaker grille to the trim panel and remove the speaker grille.
12. Release the latch and remove the lock button guide.
Installation
1. Install the lock button guide on the decorative panel and secure it with the retainer.
2. Install the speaker grille into the decorative panel and secure it with Torx screws.
3. Place the door handle on the decorative panel and secure it with Torx screws.
4. Place the door pocket on the trim panel and secure with Torx screws.
5. Install the fasteners on the decorative panel.
6. Install the decorative panel on the door and fasten the clips.
7. Install the door handle and pocket screws.
8. Install the handle cover and secure it with the screw.
9. Attach the front glass guide to the door, connect to the tweeter type connectors "Lucar" and fix the front guide.
Comments on this article