Rear door glass (Freelander 1)

Dismantling

1. Remove the plastic door panel trim.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the rear door.

2. Lower the glass to provide access to the nuts securing the glass to the brackets.

3. Loosen the nuts securing the glass to the brackets.

4. Remove the window seal from the door.

5. Remove the glass from the rear small glass seal.

The article was copied from the website: www.LRman.ru

6. Lift the glass and remove it from the door.

Assembly

1. Install the glass on the door and insert it into the rear small glass seal.

2. Replace the window seal.

3. Install the glass on the brackets and tighten the nuts to a torque of 8 Nm.

4. Raise and lower the glass to check that the seal is installed correctly.

5. Install the plastic door panel trim.

DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the rear door.