Dismantling
1. Release the front glass guide from the attachment to the front door.
2. Disconnect type electrical connector "Lucar" and remove the front glass guide.
3. Remove the door handle trim.
4. Remove the 2 handle fixing screws and remove the handle.
5. Turn away the screw of fastening of an overlay of the handle to a door and remove an overlay.
6. Unscrew the 6 Torx screws securing the decorative panel, release the panel from the 3 latches and the lock button and remove the panel.
7. Turn away 6 nuts of fastening of the loudspeaker and remove the loudspeaker.
NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
8. Remove 3 decorative panel clips.
9. Remove the lock button guide.
Installation
1. Install the speaker and secure it with nuts.
2. Install the lock button guide.
3. Insert the decorative panel fasteners.
4. Install the decorative panel on the door. Install the lock button guide and secure it with the clips.
5. Install and tighten the Torx screws.
6. Install the handle cover and secure it with the screw.
7. Install the handle and fix it with screws.
8. Establish an overlay of a door handle.
9. Connect type connectors "Lucar" to the front glass guide and fix it.
Comments on this article