Contents: Dismantling ⇩ Installation ⇩
Dismantling
1. Remove the rear door glass.
DOORS, Removing the front door assembly to provide access to other components, installing the front door, Rear door glass.
2. Remove the window seal from the door. First remove the bottom part of the seal, then the vertical front part up to the top corner.
3. Release the top corner of the rear small glass from the frame. Turn the rear small glass and seal. Release the remaining part of the seal from the door and remove the rear small glass and seal.
4. Remove the rear small glass from the seal.
Installation
1. Insert the rear small glass into the seal.
2. Lubricate the seal with soapy water in the area where the rear small glass is located.
3. Insert the rear small glass together with the seal into the rear lower corner of the window opening. Turn the rear small glass and insert it into the upper rear corner of the window opening. Press through the bridge on the rear small glass in the rear direction to insert the seal of the rear small glass into the door.
4. Starting from the top of the lintel, insert the top of the seal into the door. The radius of the top corner of the seal should match the profile of the window opening.
5. Without inserting the seal into the front part of the frame, apply it to the front lower corner of the frame. The radius of the front lower corner of the seal should match the profile of the window opening. At the same time, make sure that the seal is correctly positioned in the front upper corner of the frame. Then press the seal and insert it into the front part of the frame.
6. Insert the lower part of the seal into the door.
7. Install the rear door glass.
DOORS, Removing the front door assembly to provide access to other components, installing the front door, Rear door glass.
Comments on this article