Inspection and verification (Freelander 2)

CAUTION: Diagnostics by substituting a component from another vehicle is NOT permitted. Substituting control modules does not guarantee confirmation of the fault and, in addition, may cause additional faults in the vehicle being tested and/or in the vehicle from which the modules are removed.

1. Visually inspect for obvious signs of mechanical and electrical damage.

Mechanical factors	Electrical factors
Lamps	Fuses/Relays (Refer to electrical manual) Wiring harness Correct connection of electrical connectors Loose or corroded connections

3. If an obvious cause for the problem you have identified or the problem described by the customer is found, correct it (if possible) before proceeding with further actions.

4. If the cause is not visually obvious, check for DTCs and refer to the Diagnostic Trouble Code (DTC) Index.

The source of the article is located on the website LRMAN.RU

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article review: Roman Mitrofanov