Air cleaner housing (Range Rover 3)

Dismantling

1. Remove the air filter element.

ENGINE MANAGEMENT SYSTEM: V8 engine, REPAIR WORK, Air cleaner element.

2. Unscrew the bolt securing the lower part of the air filter housing.



3. Unscrew the clamp securing the air hose to the bottom of the air filter housing.

4. Remove the lower part of the air filter housing.

NOTE: If disassembly was performed only to provide access to other system components, no further disassembly operations should be performed.

The article was copied from this resource: lrman.ru

5. Remove the supports from the bottom of the air filter housing.

Assembly

1. Install the supports on the bottom of the air filter housing.



2. Install the lower part of the air filter housing, connect the air hose and tighten the mounting bolt.

NOTE: Before finally installing the lower air cleaner housing onto its supports, make sure the air hose fits over the tabs on the filter housing nipple.

3. Fully tighten the air hose clamp to the bottom of the air filter housing.

4. Install the air cleaner filter element.

ENGINE MANAGEMENT SYSTEM: V8 engine, REPAIR WORK, Air cleaner element.