Relay: Integrated Ignition and Fuel Control Unit (Range Rover 3)

Dismantling

1. Disconnect the negative battery terminal.



2. Remove the 10 screws securing the cover of the mounting box and remove the cover.



3. Disconnect and remove the control unit relay from the control unit compartment.

Assembly

1. Install the relay into the socket of the mounting box and connect the connector.

2. Install the cover of the mounting box, screw in the screws and tighten them to a torque of 2 N·m.

The original article can be found here www.lrman.ru

3. Connect the negative terminal to the battery.