Contents: Dismantling ⇩ Assembly ⇩
Before disconnecting the battery, make sure that all requirements and conditions contained in the section on disconnecting the battery are met.
GENERAL INFORMATION, Precautions when working with electrical equipment.
Dismantling
1. Place the vehicle on a lift.
2. Disconnect the negative battery terminal.
3. Drain the oil from the engine.
MAINTENANCE, SERVICE OPERATIONS, Engine Oil and Oil Filter - V8 Engine.

4. Remove the 21 bolts securing the lower part of the oil pan to the upper part. Remove the lower part of the oil pan and discard the gasket.
(Original article on the web portal: LRman.ru)
Assembly
1. Wipe the mating surfaces on the oil pan.
2. Place a new gasket on the mating surface of the lower pan.
3. Install the lower part of the oil pan.
4. Install the 21 lower pan mounting bolts and tighten them to 10 Nm.
5. Fill the engine with oil.
MAINTENANCE, SERVICE OPERATIONS, Engine Oil and Oil Filter - V8 Engine.
6. Connect the negative battery terminal.
Comments on this article