Inspection and verification (Freelander 2)

CAUTION: Diagnostics by substituting an element from another vehicle is NOT permitted. Substituting control units does not guarantee confirmation of the fault and, in addition, may cause additional faults in the vehicle being tested and/or in the vehicle from which the units are removed.

1. Visually inspect for obvious signs of mechanical and electrical damage.

Mechanical elements	Electrical factors
Horn switches Movable Contact Group/Steering Wheel Angle Sensor Sound signals	Fuses/Relays (Refer to electrical manual) Wiring harness Correct connection of electrical connectors Loose or corroded connections Central Jockey Block (CJB) Battery Junction Box (BJB)

2. If an obvious cause for the problem you have identified or the problem described by the customer is found, correct it (if possible) before proceeding with further actions.

3. If the cause is not visually obvious, check the CJB for DTCs and refer to the Diagnostic Trouble Code (DTC) Index.

The article was copied from the website [lrman.ru]