Dismantling
1. Remove the center console.
CAR INTERIOR PARTS, REPAIR WORKS, Center console.
2. Loosen and remove the air box.
3. Release the clamps and disconnect the parking brake cables from the compensator.
4. Disconnect the drive from the switch.
5. Turn away 2 nuts of fastening of the lever of a parking brake.
6. Remove the parking brake lever.
Assembly
1. Install the parking brake lever on the bracket, screw on the fastening nuts and tighten them to a torque of 21 Nm.
2. Connect the wire to the switch.
3. Attach the parking brake cables to the cable equalizer.
4. Replace the air box.
5. Reinstall the center console.
CAR INTERIOR PARTS, REPAIR WORKS, Center console.
6. Check the operation of the parking brake and adjust if necessary.
BRAKES, ADJUSTMENTS, Parking brake adjustment.
Comments on this article