Dismantling
1. Remove the front dome light lens.
2. Turn away 2 bolts of fastening of a forward plafond of illumination to a body.
3. Take a plafond from an upholstery of a roof, disconnect a block and remove a plafond.
4. Loosen the nut securing the coaxial wire to the antenna base.
5. Separate the antenna base from the roof panel and remove the rubber seal.
Installation
1. Install the rubber seal and antenna base to the roof panel.
2. Connect the coaxial cable and secure with a nut.
3. Position the front cover in place and attach the block.
4. Install and fasten the front dome light to the headlining using bolts.
5. Install the rear dome light lens.
Comments on this article