Dismantling
1. Remove the nut cover on the wiper arm and unscrew the nut.
2. Remove the wiper arm from the shaft. NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
3. Remove the cleaner brush.
WIPERS AND WASHERS, REPAIR WORK, Brush - cleaner - one.
Installation
1. Install the cleaner brush.
WIPERS AND WASHERS, REPAIR WORK, Brush - cleaner - one.
2. Install the wiper arm on the shaft, aligning the extreme point of the brush with the marks on the windshield.
3. Fit the nut and tighten to 18 Nm.
Comments on this article