Dismantling
1. Remove the cleaner brush.
WIPERS AND WASHERS, REPAIR WORKS, Brush - cleaner.
2. Remove the spare wheel bracket.
EXTERIOR PARTS, REPAIRS, Spare wheel bracket.
3. Lift the nut cover on the wiper arm and remove the nut.
4. Disconnect the washer nozzle tube and remove the wiper arm. NOTE: If disassembly was carried out only to provide access to other elements of the system, then further disassembly operations should not be performed.
5. Remove the washer nozzle and tube from the wiper arm.
Installation
1. Install and secure the washer nozzle and tube in the wiper arm.
2. Install the wiper arm on the cargo area door and attach the washer tube.
3. Install the wiper arm, positioning it so that the end point of the brush is between the seal and the cargo area door. Install and tighten the wiper arm nut to 13 Nm.
4. Install the cleaner brush.
WIPERS AND WASHERS, REPAIR WORKS, Brush - cleaner.
5. Install the spare wheel bracket.
EXTERIOR PARTS, REPAIRS, Spare wheel bracket.
Comments on this article