Contents: Dismantling ⇩ Assembly ⇩
Dismantling
1. Drain the working fluid from the automatic transmission housing.
AUTOMATIC TRANSMISSION - GM 5L40-E, ADJUSTMENTS, Automatic transmission fluid - draining and filling.
2. Evenly and gradually loosen and remove the 20 tray mounting screws.
3. Remove the pan and discard the gasket.
Assembly
1. Wipe the oil pan flange and the mating surface of the crankcase.
2. Install a new gasket on the pan and align the pan with the automatic transmission housing.
3. Install the oil pan mounting screws and tighten them gradually and evenly to a torque of 10 Nm.
The original text was published on the website: LRMAN.RU
4. Fill the automatic transmission with working fluid.
AUTOMATIC TRANSMISSION - GM 5L40-E, ADJUSTMENTS, Automatic transmission fluid - draining and filling.
Comments on this article