Electrovacuum valve of the control system (Range Rover 3)

Before disconnecting the battery, make sure that all precautions specified for this procedure have been followed.

GENERAL INFORMATION, Precautions when working with electrical equipment.

Removal

1. Disconnect the negative cable from the battery.

2. Remove the intake manifold gaskets.

EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Intake manifold gaskets.

3. Disconnect the connector from the solenoid valve.

4. Release the fastener and remove the valve from the bracket.

5. Label and disconnect the vacuum hoses.

Installation

1. Connect the vacuum hoses to the valve.

2. Install the valve on the bracket and connect the electrical connector.

3. Install the intake manifold gaskets.

EXHAUST MANIFOLD AND EXHAUST SYSTEM: Td6 engine, REPAIR WORK, Intake manifold gaskets.

4. Connect the negative cable to the battery.