Front seat (electric) (Discovery 1)

1. Move the seat back and unscrew the two bolts securing the seat rails.



2. Move the seat forward.

3. Unscrew the three screws securing the side trim.



4. Remove the side cover.

5. Loosen the seat belt fastening screw.



6. Remove the two seat mounting screws.

7. Disconnect the seat drive connector.

8. Remove the seat.

9. Installation is carried out in reverse order.

Tightening torques

• seat screws - 29 Nm
• side panel screws - 22 Nm
• seat belt screw - 32 Nm