The rear axle and final drive of car Land Rover Discovery 1
Rear axle and final drive — description
The rear axle beam is welded with a removable hypoid main gear and differential. The rear wheels are driven by fully unloaded half-axles. The wheel hubs are mounted on tapered roller bearings. The...
The rear axle beam is welded with a removable hypoid main gear and differential. The rear wheels are driven by fully unloaded half-axles. The wheel hubs are mounted on tapered roller bearings. The...
Rear axle
Removal Please note: Removal and installation of the bridge requires two people. 1. Drain the brake fluid from the system. 1 - axle beam, 2 - ventilation tube, 3 - axle shaft, 4 - wheel hub, 5 -...
Removal Please note: Removal and installation of the bridge requires two people. 1. Drain the brake fluid from the system. 1 - axle beam, 2 - ventilation tube, 3 - axle shaft, 4 - wheel hub, 5 -...
Brake disc (models without ABS)
Removal 1. Remove the wheel hub. 2. Unscrew the brake disc mounting bolts. 3. Remove the disc. Installation 4. Install the disc on the hub. 5. Tighten the mounting bolts to a torque of 75 Nm. 6....
Removal 1. Remove the wheel hub. 2. Unscrew the brake disc mounting bolts. 3. Remove the disc. Installation 4. Install the disc on the hub. 5. Tighten the mounting bolts to a torque of 75 Nm. 6....
Brake disc (models with ABS)
Removal 1. Remove the wheel hub. 2. Unscrew the five nuts securing the ABS sensor gear. 3. Remove the sensor gear. 4. Unscrew the brake disc mounting bolts. 5. Remove the disc. Installation 6....
Removal 1. Remove the wheel hub. 2. Unscrew the five nuts securing the ABS sensor gear. 3. Remove the sensor gear. 4. Unscrew the brake disc mounting bolts. 5. Remove the disc. Installation 6....
Rear hub
Removal 1. Place the rear axle on stands and remove the wheels. 2. Disconnect the brake caliper and secure it to the side. Do not hang by the hose! 3. Loosen the five axle shaft mounting bolts and...
Removal 1. Place the rear axle on stands and remove the wheels. 2. Disconnect the brake caliper and secure it to the side. Do not hang by the hose! 3. Loosen the five axle shaft mounting bolts and...
Main gear pinion oil seal
Removal 1. Raise the car on a lift. 2. Mark the relative positions of the propeller shaft and final drive flanges. 3. Unscrew the 4 nuts securing the cardan shaft and hang the shaft to the side....
Removal 1. Raise the car on a lift. 2. Mark the relative positions of the propeller shaft and final drive flanges. 3. Unscrew the 4 nuts securing the cardan shaft and hang the shaft to the side....
Repair of axle differentials
Disassembly Attention: Mark the installation locations of the parts. Differential bearing caps are not interchangeable. 1. Remove the axle shafts and final drive. 2. Remove the bearing ring retainer...
Disassembly Attention: Mark the installation locations of the parts. Differential bearing caps are not interchangeable. 1. Remove the axle shafts and final drive. 2. Remove the bearing ring retainer...
Adjusting the engagement in the final drive
63. Install the differential into the final drive housing. 64. Install the differential bearing caps and lightly tighten the mounting bolts. 65. Tighten the adjusting nuts. 66. Engage the driving and...
63. Install the differential into the final drive housing. 64. Install the differential bearing caps and lightly tighten the mounting bolts. 65. Tighten the adjusting nuts. 66. Engage the driving and...
Rear hub
1 - ABS sensor gear nuts, 2 - half shaft, 3 - sealing washer, 4 - half shaft bolt (5 pcs.), 5 - lock nut, 6 - lock washer, 7 - adjusting nut, 8 - washer, 9 - outer bearing, 10 - hub, 11 - inner...
1 - ABS sensor gear nuts, 2 - half shaft, 3 - sealing washer, 4 - half shaft bolt (5 pcs.), 5 - lock nut, 6 - lock washer, 7 - adjusting nut, 8 - washer, 9 - outer bearing, 10 - hub, 11 - inner...
Intermediate shaft of the rear axle
1 - intermediate shaft, 2 - bolt, 3 - mud shield, 4 - intermediate shaft housing, 5 - sealing washer, 6 - axle beam, 7 - ABS sensor. Removal 1. Remove the hub. 2. Unscrew the six bolts securing the...
1 - intermediate shaft, 2 - bolt, 3 - mud shield, 4 - intermediate shaft housing, 5 - sealing washer, 6 - axle beam, 7 - ABS sensor. Removal 1. Remove the hub. 2. Unscrew the six bolts securing the...
Special tool
Flange holder LRT-51-003 - 18G1205 Mounting plate - LRT-54-504 Pinion Bearing Puller — LRT-54-502 18G476 Hand press - LRT-99-002 MS47 Mandrel – LRT-51-001 LST106 Bearing Inner Ring Puller —...
Flange holder LRT-51-003 - 18G1205 Mounting plate - LRT-54-504 Pinion Bearing Puller — LRT-54-502 18G476 Hand press - LRT-99-002 MS47 Mandrel – LRT-51-001 LST106 Bearing Inner Ring Puller —...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Body and coating: Tailgate repairs Land Rover Freelander 2 (2006-2014)
• Chassis: Rear suspension Land Rover Range Rover 3 (2001-2012)
• Chassis: Rear drive axle Land Rover Defender 2007+ (2007-2016)
• Body and coating: Tailgate repairs Land Rover Freelander 2 (2006-2014)
• Chassis: Rear suspension Land Rover Range Rover 3 (2001-2012)
• Chassis: Rear drive axle Land Rover Defender 2007+ (2007-2016)