Wheels and tires of the car Land Rover Discovery 1
Wheels and tires — description
Description Depending on the version, the car may be equipped with steel or light alloy wheel rims. Both types of disks are equipped with tubeless tires. In the picture (just as an example!) tire...
Description Depending on the version, the car may be equipped with steel or light alloy wheel rims. Both types of disks are equipped with tubeless tires. In the picture (just as an example!) tire...
Tire wear classification table
Wear Cause Rapid wear of the outer tracks Insufficient tire pressure Wear of suspension components such as ball joints, tie rod bushings or steering shock absorbers Increased cornering speed Rapid...
Wear Cause Rapid wear of the outer tracks Insufficient tire pressure Wear of suspension components such as ball joints, tie rod bushings or steering shock absorbers Increased cornering speed Rapid...
Wheel balancing
Static imbalance results in longitudinal wheel oscillations and spotty wear of the tire tread. Dynamic imbalance leads to wheel shimmy (lateral vibrations of the wheel) and impaired vehicle control....
Static imbalance results in longitudinal wheel oscillations and spotty wear of the tire tread. Dynamic imbalance leads to wheel shimmy (lateral vibrations of the wheel) and impaired vehicle control....
Changing wheels
Note: The parking brake is installed in the transmission (does not affect the rear wheels of the car, as in most cases). Therefore, when hanging a wheel, place blocking shoes that remain on the...
Note: The parking brake is installed in the transmission (does not affect the rear wheels of the car, as in most cases). Therefore, when hanging a wheel, place blocking shoes that remain on the...
Wheel mounting studs
1. Remove the wheel. 2. Knock the stud out of the hub. 3. Install a new stud. 4. Install a suitable spacer onto the stud. 5. Using an M16x1.5 nut, tighten the stud into the hub until the stud flange...
1. Remove the wheel. 2. Knock the stud out of the hub. 3. Install a new stud. 4. Install a suitable spacer onto the stud. 5. Using an M16x1.5 nut, tighten the stud into the hub until the stud flange...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Chassis: Wheels and tires Land Rover Freelander 2 (2006-2014)
• Chassis: Wheels and tires Land Rover Freelander 2 (2006-2014)