Car heating and ventilation system Land Rover Discovery 1
Heating and ventilation
1 - fresh air intake, 2 - air intake from the passenger compartment (recirculation), 3 - air outlet for blowing glass, 4 - air outlet for blowing face, 5 - air outlet for blowing feet (front seats),...
1 - fresh air intake, 2 - air intake from the passenger compartment (recirculation), 3 - air outlet for blowing glass, 4 - air outlet for blowing face, 5 - air outlet for blowing feet (front seats),...
Heating and ventilation — description
Heating and ventilation system is installed on all models. Air conditioning is installed as additional equipment. Draft-free interior ventilation Draft-free ventilation is achieved by installing air...
Heating and ventilation system is installed on all models. Air conditioning is installed as additional equipment. Draft-free interior ventilation Draft-free ventilation is achieved by installing air...
Fan switch and light bulbs
1. Pull the heater control knobs back. 2. Pull out the blower switch button. 3. Remove the two screws securing the control panel. 4. Remove the control panel. 5. Remove the backlight lamps. 6....
1. Pull the heater control knobs back. 2. Pull out the blower switch button. 3. Remove the two screws securing the control panel. 4. Remove the control panel. 5. Remove the backlight lamps. 6....
Heater control unit
1. Disconnect the battery. 2. Pull the heater control knobs back. 3. Pull out the blower switch button. 4. Unscrew the two screws securing the control panel and remove the control panel. 5. Unscrew...
1. Disconnect the battery. 2. Pull the heater control knobs back. 3. Pull out the blower switch button. 4. Unscrew the two screws securing the control panel and remove the control panel. 5. Unscrew...
Control cables
Removal 1. Release the air distribution trims in the front panel from their clips to gain access to the rear of the panel, see "Body". 2. Open the glove compartment and remove the compartment door....
Removal 1. Release the air distribution trims in the front panel from their clips to gain access to the rear of the panel, see "Body". 2. Open the glove compartment and remove the compartment door....
Resistor block
1. Open the glove compartment, remove the compartment door. 2. Unscrew the two screws securing the resistor block to the air duct. 3. Disconnect the wiring connector and remove the resistor block. 4....
1. Open the glove compartment, remove the compartment door. 2. Unscrew the two screws securing the resistor block to the air duct. 3. Disconnect the wiring connector and remove the resistor block. 4....
Heater valve
1. Disconnect the vacuum hose from the valve. 2. Loosen the clamps securing the engine cooling system hoses to the heater valve. 3. Using a thin blade, cut off the seal between the hoses and the...
1. Disconnect the vacuum hose from the valve. 2. Loosen the clamps securing the engine cooling system hoses to the heater valve. 3. Using a thin blade, cut off the seal between the hoses and the...
Heater valve vacuum switch
1. Release the EGR tube from the clip. 2. Unscrew the bolt securing the switch to the engine compartment bulkhead. 3. Disconnect the switch connector. 4. Disconnect the two vacuum hoses and remove...
1. Release the EGR tube from the clip. 2. Unscrew the bolt securing the switch to the engine compartment bulkhead. 3. Disconnect the switch connector. 4. Disconnect the two vacuum hoses and remove...
Air intake location switch
1. Release the air distribution trims in the front panel from their clips to gain access to the rear of the panel, see. " Body ". 2. Disconnect the switch connector. 3. Push the switch out of the...
1. Release the air distribution trims in the front panel from their clips to gain access to the rear of the panel, see. " Body ". 2. Disconnect the switch connector. 3. Push the switch out of the...
Air intake flap traction relay
1. Remove the glove compartment cover. 2. Unscrew the two nuts securing the cruise control unit. 3. Secure the control unit to the side. 4. Unscrew the two screws securing the traction relay. 5....
1. Remove the glove compartment cover. 2. Unscrew the two nuts securing the cruise control unit. 3. Secure the control unit to the side. 4. Unscrew the two screws securing the traction relay. 5....
Fan — removal and installation
1. Move the seats to their rearmost position. 2. Disconnect the battery. 3. Remove the front panel, see. " Body ". 4. Unscrew the two nuts securing the lower brackets of the electric motor. 5. Remove...
1. Move the seats to their rearmost position. 2. Disconnect the battery. 3. Remove the front panel, see. " Body ". 4. Unscrew the two nuts securing the lower brackets of the electric motor. 5. Remove...
Electric fan motor
1. Remove the fan assembly. 2. Release the wire bundle from the clip. 3. Remove the three screws securing the fan assembly. 4. Remove the electric motor assembly with the fan. 5. Remove the fan...
1. Remove the fan assembly. 2. Release the wire bundle from the clip. 3. Remove the three screws securing the fan assembly. 4. Remove the electric motor assembly with the fan. 5. Remove the fan...
Heater heat exchanger
1. Remove the heater, see. " Air conditioning system ". 2. Remove the evaporator. 3. Loosen the two screws securing the heater duct to the right side of the footwell and remove the duct. 4. Remove...
1. Remove the heater, see. " Air conditioning system ". 2. Remove the evaporator. 3. Loosen the two screws securing the heater duct to the right side of the footwell and remove the duct. 4. Remove...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Electrical equipment: Heating and ventilation Land Rover Freelander 1 (1997-2006)
• Electrical equipment: Heating and ventilation Land Rover Defender 2007+ (2007-2016)
• Electrical equipment: Heating and ventilation Land Rover Freelander 1 (1997-2006)
• Electrical equipment: Heating and ventilation Land Rover Defender 2007+ (2007-2016)