Car Lighting System and Headlights Land Rover Discovery 1
Headlights — removal and installation
1. Rotate the three headlight mounting latches approximately 10 degrees until the tabs and slots on the latch and the body are aligned. 2. Remove the headlight from the socket. On models with...
1. Rotate the three headlight mounting latches approximately 10 degrees until the tabs and slots on the latch and the body are aligned. 2. Remove the headlight from the socket. On models with...
Parking light lamp
1. Remove the headlight. 2. Turn the base of the parking light bulb a quarter turn counterclockwise, remove the base together with the bulb. 3. Remove the lamp from the base. 4. Installation is...
1. Remove the headlight. 2. Turn the base of the parking light bulb a quarter turn counterclockwise, remove the base together with the bulb. 3. Remove the lamp from the base. 4. Installation is...
Front direction indicators
1. Pull the spring clip securing the indicator assembly and remove the indicator from the body. 2. Turn the lamp base counterclockwise and remove the base together with the lamp. 3. Press and turn...
1. Pull the spring clip securing the indicator assembly and remove the indicator from the body. 2. Turn the lamp base counterclockwise and remove the base together with the lamp. 3. Press and turn...
Rear light assembly (on the body)
1. Remove the side seat or storage panel. 2. Unscrew the fasteners of the access panel to the light assembly, remove the panel. 3. Disconnect the wiring connector from the light assembly. 4. Loosen...
1. Remove the side seat or storage panel. 2. Unscrew the fasteners of the access panel to the light assembly, remove the panel. 3. Disconnect the wiring connector from the light assembly. 4. Loosen...
Rear light unit (on the bumper)
1. Disconnect the lamp connectors (behind the bumper). 2. Unscrew the two nuts securing the light assembly and remove the assembly. 3. To replace the lamps: turn the lamp base counterclockwise,...
1. Disconnect the lamp connectors (behind the bumper). 2. Unscrew the two nuts securing the light assembly and remove the assembly. 3. To replace the lamps: turn the lamp base counterclockwise,...
License plate light
1. Unscrew the two bolts securing the lamp unit and remove the unit. 2. Disconnect the wires. 3. Remove the lamp. 4. Installation is carried out in reverse order.
1. Unscrew the two bolts securing the lamp unit and remove the unit. 2. Disconnect the wires. 3. Remove the lamp. 4. Installation is carried out in reverse order.
High-mounted brake light
1. Unscrew the two screws securing the brake light reflector and remove the reflector. 2. Unscrew the nut securing the lens to the rear door. 3. To replace the lamps: turn the lamp base...
1. Unscrew the two screws securing the brake light reflector and remove the reflector. 2. Unscrew the nut securing the lens to the rear door. 3. To replace the lamps: turn the lamp base...
Interior light
1. Push the lamp assembly out of the ceiling panel. 2. Disconnect the connector. 3. Use a screwdriver to remove the lamp lens and replace the lamp. 4. Installation is carried out in reverse order.
1. Push the lamp assembly out of the ceiling panel. 2. Disconnect the connector. 3. Use a screwdriver to remove the lamp lens and replace the lamp. 4. Installation is carried out in reverse order.
Luggage compartment lighting
1. Push the lamp assembly out of the trim panel. 2. Disconnect the wires. 3. Replace the lamp. 4. Installation is carried out in reverse order.
1. Push the lamp assembly out of the trim panel. 2. Disconnect the wires. 3. Replace the lamp. 4. Installation is carried out in reverse order.
Side turn signal repeater (on the body fenders)
1. Push the repeater lens to the right and remove it from the body. 2. Turn the lens counterclockwise and remove the lamp base. 3. Replace the lamp. 4. Installation is carried out in reverse order.
1. Push the repeater lens to the right and remove it from the body. 2. Turn the lens counterclockwise and remove the lamp base. 3. Replace the lamp. 4. Installation is carried out in reverse order.
Side turn signal repeater (on the bumper)
1. From inside the bumper, turn the lamp base and remove the base. 2. Replace the lamp. 3. Installation is carried out in reverse order.
1. From inside the bumper, turn the lamp base and remove the base. 2. Replace the lamp. 3. Installation is carried out in reverse order.
Instrument cluster illumination lamps
1. Remove the instrument cluster. 2. Determine which lamp needs to be replaced. Instrument cluster illumination lamps. Note: If you do not have access to the required lamp, unscrew the screws...
1. Remove the instrument cluster. 2. Determine which lamp needs to be replaced. Instrument cluster illumination lamps. Note: If you do not have access to the required lamp, unscrew the screws...
Reverse light switch (manual transmission)
The switch is located on the gear shift lever housing. Access from underneath the vehicle. Removal 1. Place the car on a lift. 2. Disconnect the battery. 3. Disconnect the wires from the switch. 4....
The switch is located on the gear shift lever housing. Access from underneath the vehicle. Removal 1. Place the car on a lift. 2. Disconnect the battery. 3. Disconnect the wires from the switch. 4....
Heater control panel light
1. Carefully pull the three control knobs. 2. Pull the button off the fan speed control lever. 3. Unscrew the two screws securing the control panel and move the panel to the side. 4. Replace the...
1. Carefully pull the three control knobs. 2. Pull the button off the fan speed control lever. 3. Unscrew the two screws securing the control panel and move the panel to the side. 4. Replace the...
Cigarette lighter illumination lamp
1. Remove the center console. 2. Press the cigarette lighter holders and pull it out of the center console. 3. Replace the backlight lamp. 4. Reinstall the removed parts.
1. Remove the center console. 2. Press the cigarette lighter holders and pull it out of the center console. 3. Replace the backlight lamp. 4. Reinstall the removed parts.
Instrument cluster backlight brightness controller
The regulator is installed on the decorative cap of the instrument cluster. 1. Disconnect the battery. 2. Remove the decorative cover of the instrument cluster. 3. Unscrew the two screws securing the...
The regulator is installed on the decorative cap of the instrument cluster. 1. Disconnect the battery. 2. Remove the decorative cover of the instrument cluster. 3. Unscrew the two screws securing the...
Switches and lamps for the power windows and seat heaters
1. Disconnect the battery. 2. Carefully remove the switch panel from the center console. 3. Loosen the two screws securing the switch block and use a screwdriver to push out the window switch frame....
1. Disconnect the battery. 2. Carefully remove the switch panel from the center console. 3. Loosen the two screws securing the switch block and use a screwdriver to push out the window switch frame....
Front fog light
1. Release the fog light wire connector from the clip. 2. Disconnect the connector. 3. Tie a string to the wires. 4. Unscrew the two nuts securing the lamp to the bumper. 5. Unscrew the two nuts...
1. Release the fog light wire connector from the clip. 2. Disconnect the connector. 3. Tie a string to the wires. 4. Unscrew the two nuts securing the lamp to the bumper. 5. Unscrew the two nuts...
Seat heater switch
1. Remove the switch block from the center console. 2. Disconnect the connectors of the two switches. 3. Remove the switch block. 4. Installation is carried out in reverse order.
1. Remove the switch block from the center console. 2. Disconnect the connectors of the two switches. 3. Remove the switch block. 4. Installation is carried out in reverse order.
Front fog light bulb
1. Remove the front fog light. 2. Unscrew the two screws securing the headlight to the bracket and remove the two spacers. 3. Release the adjusting screw ball from the bracket and remove the...
1. Remove the front fog light. 2. Unscrew the two screws securing the headlight to the bracket and remove the two spacers. 3. Release the adjusting screw ball from the bracket and remove the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Electrical equipment: Lighting and headlights Land Rover Freelander 1 (1997-2006)
• Electrical equipment: Lighting and headlights Land Rover Range Rover 3 (2001-2012)
• Electrical equipment: Lighting and headlights Land Rover Defender 2007+ (2007-2016)
• Electrical equipment: Lighting and headlights Land Rover Freelander 1 (1997-2006)
• Electrical equipment: Lighting and headlights Land Rover Range Rover 3 (2001-2012)
• Electrical equipment: Lighting and headlights Land Rover Defender 2007+ (2007-2016)