Car clutch repair Land Rover Discovery 1
Clutch — Description
1 - flywheel, 2 - clutch disc, 3 - basket, 4 - diaphragm spring, 5 - pressure plate, 6 - spring travel limiters (9 pcs.), 7 - spring bearing (2 pcs.), 8 - pressure plate rods and bolts, 9 - release...
1 - flywheel, 2 - clutch disc, 3 - basket, 4 - diaphragm spring, 5 - pressure plate, 6 - spring travel limiters (9 pcs.), 7 - spring bearing (2 pcs.), 8 - pressure plate rods and bolts, 9 - release...
Replacing the clutch
Centering pin LRT-12-001 -V8 LRT-12-040 - Tdi LRT-12-057 - Mpi Removal 1. Remove the gearbox. 2. Mark the relative position of the clutch basket and flywheel. 3. Gradually, in several steps, unscrew...
Centering pin LRT-12-001 -V8 LRT-12-040 - Tdi LRT-12-057 - Mpi Removal 1. Remove the gearbox. 2. Mark the relative position of the clutch basket and flywheel. 3. Gradually, in several steps, unscrew...
Bleeding the clutch hydraulic drive
Note: When bleeding, always fill the master cylinder reservoir with the recommended fluid. 1. Attach a suitable plastic hose to the drain nipple of the working hydraulic cylinder. 2. Place the free...
Note: When bleeding, always fill the master cylinder reservoir with the recommended fluid. 1. Attach a suitable plastic hose to the drain nipple of the working hydraulic cylinder. 2. Place the free...
Clutch master cylinder
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. Removal 1. Drain the fluid from the hydraulic cylinder reservoir. 2. Disconnect the tube from the hydraulic cylinder and plug...
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. Removal 1. Drain the fluid from the hydraulic cylinder reservoir. 2. Disconnect the tube from the hydraulic cylinder and plug...
Release bearing
1. Remove the gearbox. 2. Remove the clutch slave cylinder. 3. Remove the plastic release bearing retaining clip. 4. Remove the release bearing together with the guide sleeve. If necessary, press a...
1. Remove the gearbox. 2. Remove the clutch slave cylinder. 3. Remove the plastic release bearing retaining clip. 4. Remove the release bearing together with the guide sleeve. If necessary, press a...
Clutch slave cylinder
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. Removal 1. Remove liquid from the system through the drain nipple. 2. Disconnect the tube from the hydraulic cylinder and plug...
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. Removal 1. Remove liquid from the system through the drain nipple. 2. Disconnect the tube from the hydraulic cylinder and plug...
Damper (diesel only)
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. 1. Remove the tube between the damper and the working hydraulic cylinder. 2. Disconnect the hose from the damper. 3. Unscrew...
Note: The tightening torque for the hydraulic system tube nuts is 15 Nm. 1. Remove the tube between the damper and the working hydraulic cylinder. 2. Disconnect the hose from the damper. 3. Unscrew...
Clutch master cylinder
1. Remove the clutch master cylinder. Disassembly 2. Pull the boot off the hydraulic cylinder rod. 3. Press the rod and remove the retaining ring. 4. Remove the rod. 5. Remove the hydraulic cylinder...
1. Remove the clutch master cylinder. Disassembly 2. Pull the boot off the hydraulic cylinder rod. 3. Press the rod and remove the retaining ring. 4. Remove the rod. 5. Remove the hydraulic cylinder...
Clutch slave cylinder
1. Remove the clutch slave cylinder. Disassembly 2. Pull the boot off the hydraulic cylinder rod. 3. Remove the rod. 4. Remove the retaining ring 5. Using compressed air, remove the hydraulic...
1. Remove the clutch slave cylinder. Disassembly 2. Pull the boot off the hydraulic cylinder rod. 3. Remove the rod. 4. Remove the retaining ring 5. Using compressed air, remove the hydraulic...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Power unit: Clutch Land Rover Freelander 1 (1997-2006)
• Power unit: Clutch Land Rover Defender 2007+ (2007-2016)
• Power unit: Clutch Land Rover Freelander 1 (1997-2006)
• Power unit: Clutch Land Rover Defender 2007+ (2007-2016)