Replacing the clutch (Discovery 1)

Centering pin

• LRT-12-001 -V8
• LRT-12-040 - Tdi
• LRT-12-057 - Mpi

Removal

1. Remove the gearbox.

2. Mark the relative position of the clutch basket and flywheel.

3. Gradually, in several steps, unscrew the clutch basket mounting bolts.

4. There is no need to unscrew the three clutch cover bolts.

5. Remove the clutch.

6. Remove the clutch disc.



The material was taken from the specified website: www.lrman.ru

Installation

Note: Lubricate the clutch disc splines with Rocol MV3 or Rocol MTS grease.

7. Center the clutch disc on the mounting pin, align the marks on the clutch basket and flywheel.

8. Tighten the basket mounting bolts in several stages to a torque of 28 N·m.

9. Install the gearbox.