Engine cooling system (V8i) of car Land Rover Discovery 1
V8i Cooling System Description
The engine cooling system is liquid, forced under pressure, with a thermostat. The radiator consists of three sections: engine cooling, gearbox cooling and engine oil cooling. The intake air is...
The engine cooling system is liquid, forced under pressure, with a thermostat. The radiator consists of three sections: engine cooling, gearbox cooling and engine oil cooling. The intake air is...
Replacing the coolant
Drain Caution: Do not open the cooling system caps when the engine is hot. 1. Carefully remove the expansion tank cap, relieve residual fluid pressure in the system. 2. Unscrew the radiator drain...
Drain Caution: Do not open the cooling system caps when the engine is hot. 1. Carefully remove the expansion tank cap, relieve residual fluid pressure in the system. 2. Unscrew the radiator drain...
Expansion tank
1. Carefully remove the expansion tank cap, relieve residual fluid pressure in the system. 2. Disconnect the two hoses at the bottom of the tank and drain the liquid into a suitable container. 3....
1. Carefully remove the expansion tank cap, relieve residual fluid pressure in the system. 2. Disconnect the two hoses at the bottom of the tank and drain the liquid into a suitable container. 3....
Viscous coupling, fan, pulley and fan diffuser
For removal and installation you will need special keys LRT-12-093 and LRT-12-094. 1. Disconnect the battery. Note: On the 4.0 V8 engine, disconnect the water hose from the top of the fan diffuser....
For removal and installation you will need special keys LRT-12-093 and LRT-12-094. 1. Disconnect the battery. Note: On the 4.0 V8 engine, disconnect the water hose from the top of the fan diffuser....
Thermostat — removal and installation
Removal 1. Drain the coolant below the thermostat housing level. 2. Disconnect the radiator hose from the thermostat housing. 3. Disconnect the temperature sensor connector. 4. Remove the thermostat...
Removal 1. Drain the coolant below the thermostat housing level. 2. Disconnect the radiator hose from the thermostat housing. 3. Disconnect the temperature sensor connector. 4. Remove the thermostat...
Radiator — removal and installation
1. Drain the coolant. 2. Remove the fan together with the coupling. 3. Unfasten the two clips and remove the fan diffuser. 4. Disconnect the upper radiator hose. 5. Disconnect the hoses of the...
1. Drain the coolant. 2. Remove the fan together with the coupling. 3. Unfasten the two clips and remove the fan diffuser. 4. Disconnect the upper radiator hose. 5. Disconnect the hoses of the...
Water pump
1. Drain the coolant. 2. Remove the fan together with the coupling. 3. Disconnect the water pump inlet hose. 4. Unscrew the bolts securing the pump to the block. 5. Remove the pump. 6. Lightly coat...
1. Drain the coolant. 2. Remove the fan together with the coupling. 3. Disconnect the water pump inlet hose. 4. Unscrew the bolts securing the pump to the block. 5. Remove the pump. 6. Lightly coat...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Similar sections from Land Rover repair manuals:
• Power unit: Gearbox cooling Land Rover Freelander 2 (2006-2014)
• Power unit: Engine cooling V8 Land Rover Range Rover 3 (2001-2012)
• Power unit: Engine cooling Land Rover Defender 2007+ (2007-2016)
• Power unit: Gearbox cooling Land Rover Freelander 2 (2006-2014)
• Power unit: Engine cooling V8 Land Rover Range Rover 3 (2001-2012)
• Power unit: Engine cooling Land Rover Defender 2007+ (2007-2016)