Never use tools or equipment for purposes other than those for which they were designed. (tools and equipment) intended. Never overload equipment such as lifts, jacks, axle stands, chassis stands, or lifting devices. (hoists, chains, etc.). Damage caused by overloading is not always immediately noticeable and can result in death during subsequent use of the equipment.
Do not use damaged or defective tools or equipment, especially high-speed equipment such as grinding wheels. A damaged grinding wheel may suddenly break, which may cause serious injury.
Wear adequate eye protection when using a grinding wheel, chisel or sandblasting.
When using abrasive equipment, when working with asbestos-containing materials or when using a spray (aerosol) a suitable respiratory protection mask must be used when using the equipment.
To avoid the accumulation of large amounts of dust, aerosol particles (fog) and fumes (gases), good ventilation must be ensured.
High pressure air, lubricant and oil testing equipment
Always keep high pressure equipment in good condition and check and service it regularly, especially at connections and fittings.
Never direct a high pressure nozzle, such as a diesel injector, at the skin as the fluid may penetrate into subcutaneous tissue etc. and cause serious injury.
(The article was copied from this resource www.lrman.ru)
Comments on this article