NOTE: The description of the removal procedure may contain a description of the installation steps.
Removing
1. Remove the cover and disconnect the ground wire from the battery. Refer to procedure: Specifications (414-00 Charging system - General information, Specifications).
2. Remove the engine cover. Refer to Procedure: Engine Cover - 2.2L Duratorq - Td4 (501-05 Interior trim, Removal and installation).
3. Remove the air filter assembly. Refer to Procedure: Air Filter (303-12B Intake air distribution and filtration - 2.2L Duratorq - Td4, Removal and installation).
4. Tightening torque: 9 Nm
5.
CAUTION: Plug all openings.
6. Tightening torque: 9 Nm
CAUTION: Seals may be reused if undamaged.
7. Tightening torque: 9 Nm
NOTE: Do not proceed with further dismantling if the element is removed only for access.
Installation
1. Reinstall the elements, working in reverse order.
CAUTION: Clean mating surfaces of foreign material.
Comments on this article