Drive belt tensioner (Freelander 2)

NOTE: The removal procedure descriptions in this manual may contain installation steps.

Removal

1. Remove the cover and disconnect the ground cable from the battery. Refer to procedure: Specifications (414-00 Charging System - General Information, Specifications).

2. Remove the accessory drive belt. Refer to procedure: Accessory Drive Belt (303-05B Accessory Drive - 2.2L Duratorq - Td4, Removal and Installation).

3. Tightening torque: 45 Nm

NOTE: Install the element in the position marked during removal.

Installation

1. Install the elements back in place in reverse order.