GENERAL INFORMATION, Precautions when working with electrical equipment.
Dismantling
1. Put the car on a lift.
2. Disconnect "negative" battery terminal.
3. Remove the dipstick.
4. Remove the 2 nuts securing the oil dipstick tube bracket to the valve cover.
5. Turn away a nut and remove a lath of fastening of a tube of an oil probe to the oil pallet.
6. Remove the dipstick tube, washer and O-ring. Dispose of the O-ring.
Assembly
1. Wipe the dipstick tube and mating surfaces on the oil pan.
2. Install a new O-ring on the sump, insert the dipstick tube with washer into the sump.
3. Install the clamping bar and tighten the nut.
4. Install and tighten the 2 nuts securing the dipstick tube bracket to the valve cover.
5. Insert the dipstick.
6. Check the oil level and top up if necessary.
7. Attach "negative" battery terminal.
Comments on this article