Sound signal — removal and installation (Freelander 1)

Dismantling

1. Unscrew the bolt securing the horn to the body.

2. Disconnect the connector from the horn and remove the horn.

NOTE: If disassembly was performed only to provide access to other system components, no further disassembly operations should be performed.

3. Loosen the nut securing the bracket to the horn and remove the bracket.

The original article is located on the website (www.lrman.ru)

Installation

1. Attach the bracket to the horn and secure with the nut.

2. Connect the connector to the horn.

3. Install the horn on the body and secure it with a bolt.