Contents: Dismantling ⇩ Installation ⇩
Dismantling
1. Remove the protective film from the cargo door.
DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the luggage compartment door.
2. Unscrew the 4 screws securing the lock to the door.
3. Release the door lock, providing access to the wiring harness clamps and pads.
4. Disconnect the 2 pads from the door lock.
5. Loosen the 2 clamps on the wiring harness from the lock.
6. Remove the door lock.
7. Remove the screw from the solenoid and remove the electric motor from the lock.
Installation
1. Install the solenoid into the lock, install and tighten the screw.
2. Install the door lock, connect the pads and clamps of the electrical wiring harnesses.
3. Install the door lock, install and tighten the screws.
4. Install the cargo door protective film.
[The original article is located on LRman.ru]
DOORS, Removing the front door assembly to provide access to other components, installing the front door, Plastic trim for the luggage compartment door.
Comments on this article