Dismantling
1. Remove the front door protective film.
DOORS, Removing the front door assembly to gain access to other components, installing the front door, 5-door plastic front door trim.
2. Disconnect the pads from the door lock, mirror and power window motor.
3. Remove 8 collars of fastening of a plait to a door.
4. Loosen the 2 blocks at the base of the rack "A" and disconnect the pads.
5. Remove the harness shell from the front of the door, pull the electrical wiring out of the door.
6. Separate the harness shell from the rack "A" and pull the harness out of the rack "A".
7. Remove the door wiring harness.
Installation
1. Partially position the harness in the rack "A".
2. Put the sheath on the harness and position the sheath in the rack "A".
3. Pull the harness through the hole in the front of the door and secure the shell to the door.
4. Attach and secure the connector blocks to the rack base "A".
5. Position the harness in the door and secure with clamps.
6. Attach blocks to a mirror, the lock of a door and the window lifter electric motor.
7. Install the protective film on the front door.
DOORS, Removing the front door assembly to gain access to other components, installing the front door, 5-door plastic front door trim.
Comments on this article